![](https://static.zsdocx.com/FlexPaper/FileRoot/2019-3/14/18/3ce3ad81-cefb-4f58-aba2-a6b53c9cc932/3ce3ad81-cefb-4f58-aba2-a6b53c9cc932pic.jpg)
![倒立擺的應用分析控制方法研究.pdf_第1頁](https://static.zsdocx.com/FlexPaper/FileRoot/2019-3/14/18/3ce3ad81-cefb-4f58-aba2-a6b53c9cc932/3ce3ad81-cefb-4f58-aba2-a6b53c9cc9321.gif)
版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、This thesis investigates two control methods for the stabilization of an inverted pendulum system, the Fuzzy and PID.it also addresses some of the potential benefits of using both controllers to control an inverted pendu
2、lum system. Considering which technique and control method is best for the control of pendulum angle and the cart's position. The Inverted pendulum (IP) represents a classical and challenging control problem; this report
3、 explores the use of these methods like the proportional Integral Derivative (PID), for controlling the linear systems of the inverted pendulum which requires the accurate mathematical model of the system of which during
4、 the control process the cascade PID method was used. And for the FUZZY logic controller which is an artificial Intelligence (AI), was used for the controlling of the non linear system. The stages of the development of a
5、 fuzzy logic controller using a four input Takagi-Sugeno fuzzy model were presented.This paper is to implement and optimize fuzzy logic control algorithms in order to balance the inverted pendulum. A general analysis has
6、 been carried out using the matlab simulink on these controllers and they have proven to stabilize the Inverted pendulum. after a critical assement it was discovered that each have a successful control edge over the othe
7、r, the fuzzy logic give a more better response to the system based on the specific analysis, like the rise time, settling time, over shoot but yet they both possesses some similar qualities which are also very important
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 眾賞文庫僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 柔性倒立擺的控制方法研究.pdf
- 柔性倒立擺穩擺控制方法研究.pdf
- 倒立擺的H-,∞-控制方法研究及應用.pdf
- 倒立擺系統控制方法的研究.pdf
- 基于倒立擺系統的控制方法研究.pdf
- 基于變結構方法的倒立擺控制研究.pdf
- 直線倒立擺系統的若干控制方法研究.pdf
- 旋轉倒立擺系統控制方法的研究.pdf
- 基于多級倒立擺的智能控制方法研究.pdf
- 二級倒立擺控制方法研究.pdf
- 預測控制方法在倒立擺系統中的應用研究.pdf
- 倒立擺的模糊控制研究.pdf
- 倒立擺系統控制方法的研究與設計.pdf
- 多級倒立擺控制算法的研究與應用.pdf
- 倒立擺系統建模與控制方法研究.pdf
- 基于神經網絡的倒立擺控制方法及其應用研究.pdf
- 倒立擺系統的控制研究.pdf
- 一階倒立擺模糊控制方法的研究.pdf
- 倒立擺系統穩擺控制算法研究.pdf
- 環形倒立擺模型分析及控制策略研究.pdf
評論
0/150
提交評論